JTS SIEM-111 Wireless Monitor System
JTS SIEM-111 In Ear Monitoring Complete System (Siem-111T, Siem-111R & IE1), The JTS Siem111 in ear monitoring system includes 1 x Siem111T transmitter, 1 x Siem111R receiver and 1 pair of IE-1 earphones. This complete affordable in ear monitoring system has been long awaited for as more performers are used to having in ear monitoring instead of relying on wedges. The JTS SIEM-111 makes in ear monitoring affordable for every musician.
Features
SIEM-111T - UHF PLL Single Channel Transmitter
- The SIEM-111 System features reliable JTS UHF PLL technology on Channel 38
- There are 961 selectable UHF channels available. As many as 16 sets of SIEM-111T transmitters can operate on the same stage on Channel 38
- The system offers 4 groups, with each group having 16 compatible preset channels to choose from. This allows the monitor engineer to set up systems quickly and easily
- MPX Stereo Audio Transmission / Reception, switchable to Mono operation if desired
- All metal case construction on the SIEM 111R and SIEM 111T
- The JTS advanced circuitry assures outstanding signal-to-noise ratio
- IE-1 earphones seal off the ear canal with JTS designed Dyna-Driver ear buds which reduce undesired stage noise, ambient sound levels
- 3 pairs of different sized Silicon sleeves included with the IE series earphones ensure a right fit for the users ear canal and comfort
SIEM-111R - UHF PLL Body-Pack Receiver
- S/N Ratio: 80 dB (A Weighted)
- Image Rejection: 80 dB
- Channel Separation: 35 dB
- Frequency Response: 60~15,000 Hz (-3dB)
- T.H.D.: 1% Typical
- Frequency Stability: ±10KHz
IE-1 Dual Performance Drivers Monitoring Earphone, The IE-1 is designed with dual performance drivers and built-in crossover. It loyally reproduces precision highs, natural mids, and full bass. The excellent IE-1 is specially designed for JTS wireless in ear monitoring system. Yet the dynamic design makes itself also perfectly compatible with systems from other major brands. High-dynamics, High-definition, Low-noise, distinct sound stage, transparent and airy highs, clear low-frequency, excellent isolation, as well as endurance for high sound pressure level, extreme durability and accurate audio reproduction.
Specification
- Driver: Dual balanced armatures(Single Hi/Single Low)with a passive crossover
- Frequency Response: 20~18000 Hz
- Impedance: 22Ω
- Sensitivity (at 1000Hz): 120 dB/mW
- Max. Input Power: 150mW
- Distortion: Less than 0.3%
- Cord length: 140cm
- Net Weight: 7 grams (excluding cable)
- Output Connector: Gold-plated Ø3.5mm phone, Stereo
- Option: Dual Plug Airline adaptor, 1/4” Adaptor (6.3mm)
- Standard: Carrying Case
- Accessories: Cleaning Rod, Three pairs of Silicon Sleeves (small, medium, and large)
Specification
SIEM-111T - UHF PLL Single Channel Transmitter
- Carrier Frequency Range: 502~960 MHz
- RF Output Power: 10 mW
- Nominal Frequency Deviation (modulation): ±40KHz
- Audio Input Impedance: 20kΩ
- Nominal Input Level: -10 dBV ; 0 dBV (ATT-10 dBV)
- Maximal Input Level: 10 dBV ; 20 dBV (ATT-10 dBV)
- LCD Display: AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency
- Audio Input Connector: 2 x Balanced XLR /Ø6.3mm phone Combo Socket
- Audio Output Connector: 1 x 1/8” Stereo Phone Jack, 1 x 1/4” Stereo Phone Jack
- Loop Out Connector: 2 x Balanced Loop Out Socket
- Switching Power Supply: 100-240V Switching power supply
SIEM-111R - UHF PLL Body-Pack Receiver
- Input Level Select Switch: 0dB / -10dB
- Earphone Output: 60 mW
- Minimum Load Impedance: 16Ω
- LCD Display: RF Level, Lock-On, Battery Fuel Gauge, Stereo/Mono, HF booster, Dynamic Limiter, Group, Channel, Mute, Frequency
- Output Connector: 1/8” Stereo Phone Jack
- Power Supply: 2 AA batteries
- Operation Hour: Over 12 hours